Skip to content
ezenos manual Logo ezenos manual Logo
  • Overview
  • Setup Wizard
  • System Status
    • Overview
    • Routes
    • System Log
    • Realtime Graphs
    • Legacy Graphs
    • Host Statistics
    • App Statistics
  • Network Setting
    • Interface Overview
    • WAN_4G Configuration
    • WAN Config
    • LAN Config
    • DHCP
    • DNS
    • Hostnames
    • Static Routes
    • Dynamic DNS
    • Switch
  • Wi-Fi Setting
    • Basic Setting
    • Guest Network
    • Advanced Setting
    • User Status
    • Wi-Fi Relay
  • Multi-WAN
    • Multi-WAN Policy
    • Multi-Dial
  • QoS Control
    • Smart QoS Control
    • IP Rate Limit
  • Network Security
    • ARP Binding
    • ARP Security
    • ARP Trust
    • MAC Filter
    • Port Mapping
    • Connections Limit
    • Anti-DDoS
  • Group Object
    • Group IP
    • Group Time
    • Group Port
    • Group APP
    • Group MAC
    • Group Domain
  • Behavior Management
    • One-click Management
    • Firewall ACL
    • URL Filter
    • URL Record
    • URL Redirect
    • DNS Filter
  • VPN
    • PPTP Server
    • PPTP Client
    • L2TP Server
    • L2TP Client
    • IPSec
  • Authentications
    • PPPoE Server
    • Account Manage
    • User List
    • Push Message
  • Advanced Set
    • Advanced Interface Set
    • Eth Mode
    • UPnP
    • Port Mirror
    • VLAN
    • Set WAN Number
    • Wake on LAN
    • PPPoE Relay
  • System Manager
    • System Settings
    • Router Password
    • Join Cloud
    • Cron Task
    • Backup / Restore
    • Reset to Defaults
    • Web Port
    • Flash Firmware
    • Feature Library
    • Reboot
  • System Tools
    • Diagnostics
    • Lasting Ping
    • Speed Test
    • Conntrack Tool
    • LED On/Off
    • Backup WiFi Factory

IP Rate Limit

IP Rate Limitastadm2019-05-01T17:09:19+00:00

IP Rate Limit

IP rated limit can perform the bandwidth management along with smart QoS and also works independently. It’s separated with smart QoS flow control. When smart QoS flow control is enabled, the IP rated limit is still valid, which is equivalent to the maximum speed limit of the IP address in the internal network. Since IP rated limit is exceptionally effective, in most cases there is no need to perform a single IP fixed speed limit.

Note:
The uplink limit and downlink limit here can be configured for a single IP address or IP group.
After configuring the IP rated limit and enabled [Inter-Share Sharing], the used IPs share the configured uplink limit speed.

ezenos © Copyright   |  All Rights Reserved
Go to Top