Interface Overview
Displays information about the status, connection mode, bandwidth, and NIC utilization of all interfaces on the router.
Hardware Interface
Display information about hardware interfaces such as 4G, WAN, and LAN.
- Click the blue color “Edit” button to edit the interface configurations. For example, configure 4G connection protocol and mobile APN settings.
- Click the green color “Connect” button to reconnect the interface, such as redialing.
- Click “Close “to temporarily disable an interface.
4G Mobile Interface
Please install the SIM card when the router is turned off or hard restart the router after installing the SIM card.
Some mobile carriers require to input APN settings to connect to their mobile network. You can contact the carrier to get the most updated APN settings. Click “Edit” on the row of “WAN_4G” to enter the configuration page. Input APN gateway address, username, and password. Then click “Save and apply”.
APN: Access point name (APN) is the gateway to access carrier’s network
Username: User name to access mobile carrier’s network
Password: Password to access mobile carrier’s network
Authentication: Normally use PAP
PIN: 4 digit numbers of the PIN code of SIM card
It will take a few minutes to set up the connection after input the APN settings.
Virtual Interface
Display related information of the virtual interfaces, including 4G mobile, Wi-Fi relay, WAN port extension, and multi-WAN. It is the solo entry for the virtual interface parameter configuration.