Skip to content
ezenos manual Logo ezenos manual Logo
  • Overview
  • Setup Wizard
  • System Status
    • Overview
    • Routes
    • System Log
    • Realtime Graphs
    • Legacy Graphs
    • Host Statistics
    • App Statistics
  • Network Setting
    • Interface Overview
    • WAN_4G Configuration
    • WAN Config
    • LAN Config
    • DHCP
    • DNS
    • Hostnames
    • Static Routes
    • Dynamic DNS
    • Switch
  • Wi-Fi Setting
    • Basic Setting
    • Guest Network
    • Advanced Setting
    • User Status
    • Wi-Fi Relay
  • Multi-WAN
    • Multi-WAN Policy
    • Multi-Dial
  • QoS Control
    • Smart QoS Control
    • IP Rate Limit
  • Network Security
    • ARP Binding
    • ARP Security
    • ARP Trust
    • MAC Filter
    • Port Mapping
    • Connections Limit
    • Anti-DDoS
  • Group Object
    • Group IP
    • Group Time
    • Group Port
    • Group APP
    • Group MAC
    • Group Domain
  • Behavior Management
    • One-click Management
    • Firewall ACL
    • URL Filter
    • URL Record
    • URL Redirect
    • DNS Filter
  • VPN
    • PPTP Server
    • PPTP Client
    • L2TP Server
    • L2TP Client
    • IPSec
  • Authentications
    • PPPoE Server
    • Account Manage
    • User List
    • Push Message
  • Advanced Set
    • Advanced Interface Set
    • Eth Mode
    • UPnP
    • Port Mirror
    • VLAN
    • Set WAN Number
    • Wake on LAN
    • PPPoE Relay
  • System Manager
    • System Settings
    • Router Password
    • Join Cloud
    • Cron Task
    • Backup / Restore
    • Reset to Defaults
    • Web Port
    • Flash Firmware
    • Feature Library
    • Reboot
  • System Tools
    • Diagnostics
    • Lasting Ping
    • Speed Test
    • Conntrack Tool
    • LED On/Off
    • Backup WiFi Factory

Multi-Dial

Multi-Dialastadm2019-04-29T14:07:11+00:00

Multi-Dial

Configure multiple dials to generate multiple ADSL PPPoE dial-up connections through only one WAN port.

Click the button of “Add”, fill in the user name and password provided by the landline carrier and repeat the “Add” operation for several times.

After applied the multi-dial configuration, the interface with similar name wan_m1/wan_m2 will be generated. You can configure more settings on the virtual multi-dial interfaces under [Network Settings] – [Interface Overview] – [Virtual Interface].

Note:

1) This function might be blocked by the ADSL PPPoE landline carriers.

2) This function does not need to connect to the VLAN switch.

3) This function should not be used with both physical and virtual interfaces. Please disable the virtual interface bound to the physical WAN interface before applying the multi-dial function on this WAN port.

ezenos © Copyright   |  All Rights Reserved
Page load link
Go to Top