Online User’s Manual

Power Supply

Please always use the default power supply provided together with the router. Use other kinds of unauthorized power supply might cause critical damage to the router.

Instructions

The device will start automatically after connected to the power supply. The light will flash during startup. The system power indicator will be solid after started.

Indicators

Power: Light on – the equipment is energized
System: Light on – the system is turned on
Mobile / WAN / LAN

Connect to ezenos router

MOBILE

Using your mobile phone, walk around and look for a location for the 4G router that gets a good signal. The suggested signal strength is at least 2 bars.

1. WI-FI

After connected to the electrical outlet, two 2.4G Wi-Fi hotspot “ezenos-xxxx” and 5.8G Wi-Fi hotspot “ezenos-xxxx-5G” will be created. The default Wi-Fi settings are without encryption.

2. ETHERNET

You can connect a computer to one of the RJ45 LAN ports on the 4G router. The related LAN port indicator will turn on after connected to the computer and have data flow.

IP Settings

By default, the router has enabled DHCP, which means that if you select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, the router should lease you an IP and you should be ready to log in.

Configure static IP address manually

First, select an IP address in the range of “192.168.44.100~250”. Next, enter the subnet mask “255.255.255.0”. Then enter the default gateway “192.168.44.1”. Finally, enter primary and secondary DNS server IP’s.

Log in Admin

Open a web browser and type http://192.168.44.1 in the URL address bar. Use default username “admin” and default password “admin” to log in the router admin page.

We’re Here To Help Your Internet Speed Blast Off!

Through Creative Ideas, Innovation & Sheer Determination

Let's Get Started!